HDD Horizontal Directional Drilling > Swivels >
Swivel "Speedpipe" (5 t, ø=50 mm)
1961.5946.00
HDD Horizontal Directional Drilling > Swivels >
Swivel 15 t (2-3/8" reg pin x clevis) d=83 mm
requires shackle 4.75 t
for reamer FLYCUTTER and MIXER
1961.5942.00
HDD Horizontal Directional Drilling > Swivels > swivel 30 tons,
Swivel 30 tonnes
for continuous pulling forces of 300 kN (30 tons)
on both sides with pulling forks
including two screw bolts
1961.5540.00
HDD Horizontal Directional Drilling > Swivels > Swivel 7 tonnes
Swivel 7 t
OD 80 mm (3.14")
for continuous pulling forces of 70 kN
(7 tonnes, 15'400 lbs)
on both ends with pulling eyes
1900.5542.00
HDD Horizontal Directional Drilling > Swivels > Swivel 15 tonnes
Swivel 15 t
OD 115 mm (4.5")
for continuous pulling forces of 150 kN
(15 tonnes, 33'000 lbs)
at both ends with pulling eyes
1900.5541.00
HDD Horizontal Directional Drilling > Swivels > Swivel with stop,15 tonnes
Swivel with stop 15 tonnes
for reamer ROCK
requires 2x 1945.5257.30
1960.5540.00
HDD Horizontal Directional Drilling > Swivels > swivel with flange, 15 tonnes
Swivel with flange, 15 t
OD 127 mm (5")
with axial and radial bearings
continuous load: 150 kN (15 tonnes, 33'000 lbs)
for KODIAK reamers
weight: 3.6 kg (56 lbs)
1961.5912.00
HDD Horizontal Directional Drilling > Swivels > swivel with flange, 25 tonnes
Swivel with flange, 25 t
OD 204 mm (8")
with axial and radial bearings
continuous load: 250 kN (25 tonnes, 55'000 lbs)
for KODIAK reamers
weight: 12 kg (26 lbs)
1961.5916.00
HDD Horizontal Directional Drilling > Swivels > swivel with flange, 35 tonnes
Swivel with flange, 35 t
OD 229 mm (9")
with axial and radial bearings
continuous load: 350 kN (35 tonnes, 77'000 lbs)
for KODIAK reamers from Ø 355 mm (14")
diameter for shackle: 36 mm (1.41")
weight: 25.5 kg (56 lbs)
1961.5918.00
